HOME > Products > SC-6E

Product

Products Info:SC-6E

SC-6E(Non CNC-Multi spindle machine Chucker Type)
6 Spindle Lathe/Wide Adaptability/Most reasonable model

Characteristics

* Since the development in 1962, SHIMADA keeps improving this model with customer’s requirements.

* All slides and motions are driven by hydraulic.

  1. Easier (tooling) set up due to camless drive mechanism
  2. Max turning diameter is φ60mm( 2.36" )
  3. High Accuracy and Rigidity
    a) All Slides are hardened and hand scraped. b) The main end tool slide is guided along a chevron-type (V-shaped) slideway which are supported by three-point. c) Rigid box construction with hardened and hand scraped box slide way.
  4. The most wide tooling zone and chip floor in the multi-spindle industry
  5. Possible to attach cross-slides on all any positions
  6. Corresponds to various FMS system

Specifications

Function Item  
Turning Capability Collet capability φ60
Powor chuck 5" Hydraulic chuck
Max. turning length 200mm(7.87")
Spindle No. of spindle 6
Spindle diameter φ70(φ2.75")
Max. spindle RPM 3000min-1
Motor Select from 5.5kw, 7.5kw, or 11kw
End Tool Slide Drive system Camless Hydraulic
Optional:NC Servo
Stroke 200mm(7.87")
Tool diameter φ55(φ2.2")
Slide thrust 1850kgf/m2
Cross Slide No. of Cross slide Max:6
Weight & Dimentions Floor space 2300mm(90.6")×2000mm(78.5")
Machine weight 3500kg(7800lb)
2SI-6/8 2SI-10 HS4200 VT4-350 ISM B6 SERIES B6 SERIES CN660 CN660-DSP SC-6E SS-8